REPLACEMENT OF NEBULIZER CHAMBER ASSEMBLY
In the packaging you will find one spare micronization cone that can be
used as replacement when necessary . Contact your device supplier or
call our customer service for other nebulizer chamber assembly parts.
REPLACEMENT OF THE AIR FILTERS
This unit features outlet and inlet air filters which ensure that the mist
generated contains no extraneous substances. Their replacement
frequency depends on the atmosphere conditions in which the device is
used (e.g. the amount of dust in the ambient air), but they should usually
be replaced after approximately 20 hours of usage or when discolored.
10 replacements filters (5 inlet and 5 outlet) are included with this
system. Additional filters can be purchased from your device supplier.
To change the filters:
1. Remove the nebulizer chamber
from the unit. Slide out the air
inlet cover from the front of the
unit (figure 8). Then, use a pointed
object to remove the filter.
2. Remove the outlet filter with your fingers.
3. Replace with new inlet and outlet
filters and slide back the air inlet cover.
CAUTION
Do not drop the nebulizer system as it is not shock proof.
Do not modify or disassemble the unit.
Do not clean with thinner, benzene or any other harsh cleaner.
Keep the device in a suitable place. Avoid high temperature, direct
sunlight, high humidity and dust.
12
13
CARE AND MAINTENANCE
Figure 8
Air Outlet
Filter
Air
Inlet
Filter
