background image

MiniVol

Portable Air Sampler

Operation Manual

Airmetrics

2121 Franklin Boulevard, #9

Eugene, OR 97403

U.S.A.

P H O N E :

   541. 683.5420

F A X :

        541. 683.1047

E-mail:  [email protected]

 www.airmetrics.com

Notice:

Information in this manual is subject to change without notice and does not
represent a commitment on the part of Airmetrics, which reserves the right to make
changes in construction, design, specifications, and/or procedures that may not be
reflected in  this man ual.

Printing History

Manua l Version 1.0  -  O ctober, 1992, ap plies to Sampler M odels 3.x
Manua l Version 1.0a -  N ovembe r, 1992, applies to Sa mpler M odels 3.x
Manua l Version 1.1  -  Jun e, 1993, applies to S ampler M odel 4.0
Manua l Version 1.1a -  Jan uary, 1994, ap plies to Sampler M odel 4.0
Manua l Version 1.2  -  D ecember, 1 994, applies to Sa mpler M odel 4.0
Manua l Version 1.2a -  Ju ly, 1996, applies to S ampler M odel 4.1
Manua l Version 4.2 -   M ay, 1997 app lies to Sampler M odel 4.2
Manua l Version 4.2a - F ebruary, 1998  applies to Sam pler Mode l 4.2
Manua l Version 4.2b - D ecember, 2 000 applies to Sa mpler M odel 4.2
Manua l Version 4.2c - Ju ne, 2001 app lies to Sampler M odel 4.2

Summary of Contents for MiniVol

























































Reviews:

Related manuals for MiniVol