SI-001-r2
SI-0001 PC Motor Replacement AP332F (Maxon)
Page 6
d.
Attach micro-switch mount assembly
(note orientation) to motor mount plate.
Check that pitch feedback rods are aligned
concentrically with the three respective
holes in the microswitch mount assembly.
Insert the prop wires back into the
microswitch mount.
Thread-lock three screws (Loctite 243).
Note:
If your propeller has the
mircroswitch mount assembly using
the microswitches with wires
attached, then it must be upgraded to
the style shown using PCB mounted
microswitches. Ask Airmaster for
guidance.
e.
Place the PC Brake Cover onto the motor.
Ensure that the wires align with the slot.
Push on until the cover seats on top of the
motor.
f.
Attach PC Motor Clamp to microswitch
mount assembly with rivscrews.
Note:
As an alternative use Pan Hd Screws
8-32 UNC x 5/8” (P0237) with
primer 7471 and Loctite 277
