airmaster 1499520, Operation & Maintenance Instructions Manual

Page: 9 / 20

9
MOVING THE AIR COMPRESSOR AROUND
1. Stop the compressor and disconnect it from the power supply before you
move it.
2. ALWAYS use the handle. To prevent damage, never lift by (or put strain on)
valves or hoses.
OPERATION
If the compressor has not been used for more then 24 hours, open the drain
valve (on the bottom of the reservoir) and drain any condensate which has
collected. See page 12.
ATTACHING AIR TOOLS
1. Attach the air hose to the ¼" BSP
outlet valve.
2. Attach the tool to the end of the
air hose.
3. Turn the outlet valve handle to the
open position.
NOTE: The outlet valve is shown
without the air hose fitted for
clarity.
CAUTION: TO PREVENT INJURY, ASSISTANCE MAY BE HELPFUL WHEN
LIFTING THIS COMPRESSOR.
WARNING: BEFORE CONNECTING AIR TOOLS, MAKE SURE THAT YOU
READ THE INSTRUCTIONS SUPPLIED WITH THE TOOL, ALSO ENSURE THAT
THE TOOL IS SUITABLE FOR USE WITH THE COMPRESSOR AND HOSE
SPECIFICATIONS.