background image

2

INTRODUCTION

Thank you for purchasing this Air Compressor.

Before attempting to operate the machine, it is essential that you read this 
manual thoroughly and carefully follow all instructions given. In doing so you 
will ensure the safety of yourself and that of others around you, and you can 
also look forward to the product giving you long and satisfactory service.

SPECIFICATION

Please note that the details and specifications contained herein are correct 
at the time of going to print

.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended. Faulty goods should be returned to their place of purchase, no 
product can be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

Power supply

230 V/ 50 Hz

Dimensions (L x W x H)

546 x 352 x 560 mm

Weight

22.7 kg

Receiver capacity

24L

Motor power

2 HP

Fuse rating

13 amps

Ingress protection

IP20

Max working pressure

8 Bar/116 psi

Max flow rate

220 L/min (7.8cfm)

Sound power level

93.7 dB LwA

Guaranteed sound power level

96 dB LWA

Summary of Contents for 1499520





















Reviews: