5
AIR COMPRESSOR SAFETY INSTRUCTIONS
1.
ONLY USE WITHIN THE RECOMMENDED OPERATING TEMPERATURE RANGE:
This compressor should only be used in an ambient temperature of
b5
O
C and +40
O
C (never at or below freezing temperatures).
2.
NEVER USE AN AIR COMPRESSOR WHICH APPEARS DEFECTIVE OR IS
OPERATING ABNORMALLY:
If the compressor operates unusually or makes
strange noises, switch off immediately and purge the air reservoir. Arrange
repairs with your nearest dealer.
3.
BREATHING QUALITY AIR:
This compressor should not be used to supply
breathing quality air.
4.
SAFETY VALVE: NEVER
remove or attempt to adjust the safety valve. The
maximum pressure is factory set. Keep the safety valve free from paint and
other accumulations.
5.
AVOID UNINTENTIONAL STARTING: DO NOT
move the compressor when it is
connected to the mains power supply.
6.
BEFORE EACH USE CHECK THE COMPRESSOR AND HOSE FOR DAMAGED
PARTS:
Never use the compressor if it has been damaged in any way. Have
the compressor repaired by a qualified service engineer.
DO NOT
use the
compressor if the On/Off switch does not operate correctly.
7.
KEEP THE MOTOR AIR VENTS CLEAR:
Keep the motor vents clear and free
from dust. Wipe regularly to maintain an adequate supply of clean air and
avoid using in dusty conditions.
8.
OPERATE THE COMPRESSOR AT THE CORRECT VOLTAGE:
Make sure that the
mains supply voltage is the same as the voltage shown on the label.
9.
ALWAYS
adjust the pressure regulator to the recommended setting for the
particular spray gun or air tool being used.
10. When using the compressor for painting:
•
DO NOT
work in enclosed areas or near naked flames.
•
Ensure that the area in which you are working has good ventilation.
•
Protect your nose and mouth with a suitable face mask.
•
ALWAYS
check the safety data sheets for substances being sprayed &
ensure manufacturer’s instructions are followed.
11.
DO NOT USE THIS COMPRESSOR TO INFLATE SMALL, LOW-PRESSURE OBJECTS:
Items such as children's toys or footballs can explode if over-inflated.
12.
NEVER STOP THE COMPRESSOR BY REMOVING THE PLUG OR SWITCHING OFF
AT THE MAINS SUPPLY: ALWAYS
use the On/Off switch on the compressor.
Summary of Contents for 1499520
Page 16: ...16 DECLARATION OF CONFORMITY UK ...
Page 17: ...17 DECLARATION OF CONFORMITY CE ...
Page 18: ...18 COMPONENT PARTS ...
Page 20: ......