WX Series WeatherStation Technical Manual revision 1.000
Proprietary and Confidential
PRELIMINARY - DRAFT
69
$PAMTR,EN,9,5,DTM,1,600,001:00.00*18
$PAMTR,EN,9,1,GGA,0,10*29
$PAMTR,EN,9,2,GLL,0,10*1C
$PAMTR,EN,9,3,GSA,0,10*0F
$PAMTR,EN,9,4,GSV,0,10*2F
$PAMTR,EN,9,5,HDG,1,2,000:00.25*18
$PAMTR,EN,9,6,RMC,0,10*33
$PAMTR,EN,9,7,VTG,0,10*1B
$PAMTR,EN,9,8,XDRA,0,10*4B
$PAMTR,EN,9,9,ZDA,0,10*3F
Keep in mind when enabling sentences that the overall bandwidth of the interface should
not be exceeded. At 4800 baud, only 480 characters can be transmitted in a one second
period of time. If every one of the above sentences were enabled for transmission, their
total number of characters could exceed 800. It is possible to use the $PAMTC,EN
command to over specify the amount of data transmitted, beyond the bandwidth capacity
of the NMEA output channel. See section 1.1. for further information regarding bus
bandwidth.
Examples
Example 1:
To disable all sentences for transmission, except transmit compass heading 5
times per second, and save the settings in EEPROM, send the following sequence
of commands to the unit:
$PAMTC,EN,ALL,0
$PAMTC,EN,HDG,1,2
$PAMTC,EN,S
Example 2:
To disable all sentences for transmission, except transmit compass heading 4
times per second, and save the settings in EEPROM, send the following sequence
of commands to the unit:
$PAMTC,EN,ALL,0
$PAMTC,EN,HDG,,0:0.25
$PAMTC,EN,S
Example 3:
To reload the factory defaults for the $PAMTC,EN settings into EEPROM
without affecting other EEPROM settings (such as attitude offsets set with the
