Airmar Technology Corporation TDT1000, Owner'S Manual, Page: 13 / 17

Connecting
IMPORTANT : All test cable tags have a yellow label near the TDT100 0 connector that reads
“Connect to TDT1000.”
1. Each OEM has specific test cables. Be sure you have the correct one. Check the test-cable tag to
be sure it matches the brand of the instrument and number of pins in the transducer connector
(Figure 6).
2. If the transducer is connected to an instrument, disconnect it.
3. Plug the transducer connector into the test cable (Figure 7).
4. Plug the test cable into the test cable port on the TDT1000. Twist and lock the connector.
Figure 6. Test cable with yellow tag
Copyright© 2017 Airmar Technology Corporation
tag
TDT1000
connector
transducer
connector
AIRMAR
PN : XX-XXXX-XX
Rev : XX
TDT1000 Test Cable
Connector: XX-Brand
Customer Part # :
CONNECT TO TDT1000
test cable
port
transducer
connector
transducer
transducer
Figure 7. Transducer with connector
(not to scale)
Copyright© 2017 Airmar Technology Corporation
test cable
(purchased separately)
cable
13