TDT1000 Set-up
Battery Check
Be sure the TDT1000 is charged
or
connected to a power supply before testing begins.
1. Power the TDT1000 ON by pushing the green
Power
button (Figure 3). The indicator light will glow
green.
2. Check that at least one of the battery-status lights is illuminated green.
NOTE
: The battery will stay charged for up to 4 hours of continuous use.
Charging
NOTE
: It is time to recharge the battery when there is only one battery-status light illuminated.
1. Plug the USB connector on the charging cable into the power adapter (Figure 3).
2. Plug the power adapter into a power supply.
3. Plug the micro-USB connector on the charging cable into the USB port on the TDT1000.
4. When the TDT1000 is charging, the Charging light will glow amber.
5. When the TDT1000 is fully charged, the Charging light will no longer be illuminated. Disconnect
the charging cable from the TDT.
Figure 3. Charging the TDT1000
(not to scale)
Copyright© 2017 Airmar Technology Corporation
power
adapter
charging
power adapter port
battery-status
light (3)
USB
connector
micro-USB connector
cable
Test in Progress
indicator light
Charging
indicator light
Power
indicator light
Function
indicator light
10