AirMan SDG45S-3A8, Instruction Manual

Page: 30 / 63

4. Operation
4
-
10
A050318-1
(50/60Hz)
Single phase output voltage 100/110V
Rated single phase output 6.0/6.6kVA
Rated current 60/60A
4.4.3 Single phase output (100/110V 50/60Hz)
In the output terminal portion the single phase output terminal (U
1
-U
2
) (W
1
-W
2
) 2 set and the
auxiliary receptacle are provided.
When the AC ammeter indicates 200/220V and 400/440V, the single phase output voltage is
100/110V.
The single phase output can be used up to the rated outputs mentioned in the following table.
When using the auxiliary receptacle, the total load capacity including U
1
-U
2
terminal shall be used
not to exceed the rated single phase output in the following table.
When using both single output and three phase output at the same time, the machine shall be
used lower than the allowable current limit.
Four auxiliary receptacles shall be used lower than total 15A
×
2.
Make sure that the total load capacity of auxiliary receptacle
and U
1
-U
2
shall not exceed the rated single phase output.
Make sure that the load capacity of
W
1
-W
2
shall not exceed the rated
single phase output.
Single phase output terminal
Auxiliary receptacle
(15A)
Auxiliary receptacle
(15A)
U
1
U
2
W
1
W
2