AirMan SDG40S-8B1, Instruction Manual

Page: 15 / 69

3. Installation
3
-
1
A090641E
3.1 Transporting Unit

Use the lifting bail
“
1
”
at the center of bonnet for hoisting up
and down the machine.
Since the rope hook is not strong enough to be used for
hoisting, never use it to prevent falling accident.

When transporting the machine, be sure to put it on the truck
bed and use the rope hooks to secure it with rope

Do not hoist up the machine while it is running. Otherwise, a
fatal trouble or serious accident may occur.
3.1.1 Lifting

Use the lifting bail
“
1
”
fitted on center of bonnet.

Select an appropriate crane or truck by referring to the
mass and dimensions mentioned in “Specifications”.

Only a qualified crane operator is allowed to operate a
crane.
3.2 Conditions of Unit Installation

Exhaust gas from the engine is poisonous, and it could cause
casualties when it is inhaled.
Avoid using the machine in an insufficiently ventilated building
or a tunnel. When the machine is unavoidably used in such
insufficiently ventilated place, ventilation devices and ventilation
pipe should be provided for better ventilation.
PC002
 In case that the unit is installed indoors for
operation, suction air port and exhaust fume
outlet port should be provided for better air
ventilation.
 Make sure to secure enough space in front
of air suction port and also to secure it after
exhaust fume outlet port so that the engine
may not get overheated.

Exhaust pipe or the like should be provided
at the exhaust outlet port so as to send out
exhaust fume outdoors.

Also the cooling air outlet port of radiator
should be provided outdoors through a duct
or the like for air ventilation.
1
A040151
A040151
1
Transportation
Ventilation
In case that the unit is installed indoors
Exhaust fume
(or gas)
Exhaust fume
outlet port
Exhaust fume
extension pipe
Suction air
inlet port
Discount-Equipment.com