1.Safety
1.3 Caution during Inspection and Maintenance
A
WARNING·--
Hang a "Now Checking and under Maintenance" tag
• Before starting inspection, switch off the circuit breaker of this
machine, remove the starter key from the starter switch, and
then hang a "Now Checking and under Maintenance" tag
where it can be easily seen. The checker must keep the key
during checking and maintenance.
• Remove the negative(-) side cable from the battery.
If the above procedure is neglected, and another person starts
operating the machine during check or maintenance, it could
cause serious injury.
A
WARNING
1
----------1
• Be sure to stop the engine and remove the starter key
whenever the tension of the belt is to be adjusted.
• If the machine is running, it might catch the operator's hand
into the belts, and this could cause a serious injury.
A
WARNING
1
----------1
• Be sure to stop the engine and remove the starter key
whenever the tension of the belt is to be adjusted.
• If the machine is running, it might catch the operator's hand
into the belts, and this could cause a serious injury.
SY001
Adjusting tension of belt
TR0304
Hands off from cooling fan
W009
A
WARNING
1-------------
■
1
Cleaning by air-blow
• When cleaning dust accumulated in such devices as the
air-filter, etc., by blowing compressed air, wear safety glasses,
etc. to protect your eyes.
1-6
W003
BTW Equipment Supply LLC dba Airman Arizona • www.btwequipmentsupply.com www.airmanarizona.com
SDG45S-8E1
Instruction Manual
ORDER PARTS ONLINE
www.airmanarizona.com
