6. Periodic Inspection/Maintenance
6.5.2 Change engine oil filter
[At 50 hours for the first change and every 500 hours thereafter]
<Procedure>
CD When installing a new oil :filter"l", spread oil over
the packing "2" , and then screw it in. After the
packing "2" touches the sealing face, tighten
another 2/3 turn with a filter wrench.
® After the oil filter is assembled, check if there are
any oil leaks during operation.
(For part number, see 6.3)
6.5.3 Check GFCI receptacles
[Monthly or 250 hours operation, whichever comes first.]
2
H000049
A
WARNING
1------------------
• If the generator is stored outdoors, unprotected from the weather, test the GFCI receptacle before
each use.
• In case the GFCI has tripped due to the hazard of ground fault currents, investigate the cause and
correct it.
Regularly check the GFCI operation for safety.
<Procedure>
CD Unplug all appliances from the generator.
®Start the engine.
Test button
@Turn each single-phase and three-phase breaker ON.
© Press the TEST BUTTON
• The RESET BUTTON should extend with a click.
• If the RESET BUTTON does not extend, contact your
nearest dealer.
@ Press the RESET BUTTON
0
@When the RESET BUTTON extends during peration.
D [?
Reset button
• Unplug all appliances from the GFCI protected
receptacle.
• Press the RESET BUTTON:
IF THE GFCI CANNOT BE RESET: The GFCI is faulty. Contact your nearest dealer.
IF THE GFCI RESETS PROPERLY: Check the appliance or the power cord.
6-6
A040270
BTW Equipment Supply LLC dba Airman Arizona • www.btwequipmentsupply.com www.airmanarizona.com
SDG45S-8E1
Instruction Manual
ORDER PARTS ONLINE
www.airmanarizona.com
