6. Periodic Inspection/Maintenance
6.5.21 Clean inside of the oil fence and check it for any rust
[Every 1 years]
<Procedure>
CD Remove the fuel pipes and electric wire connected to the fuel tank.
® Remove 6 pieces of the bolts connecting oil fence and the machine with the lifting eye hooked with
the crane.
@ Lift up the machine to separate the oil fence from the machine.
© Check and clean the inside of the oil fence.
• Check the inside of the oil fence for dust, fur and other foreign matter and check it for any rust.
• When the oil fence is found rusted, remove the rust outside and inside and paint it again.
• Should any leakage be found, contact your dealer or us directly.
® Check whether the seal rubber attached on the top of oil fence is slanted or curved.
@ Combining this machine and the oil fence, tighten the nuts 6 pieces.
(J) Install fuel pipes and also electric wires.
6-16
Combining this machine
and oil fence with the
Connecting to the
electric wire @
Connecting to the
fuel pipes
®
A130924
BTW Equipment Supply LLC dba Airman Arizona • www.btwequipmentsupply.com www.airmanarizona.com
SDG45S-8E1
Instruction Manual
ORDER PARTS ONLINE
www.airmanarizona.com
