AirLive RS-1200 User Manual Download Page 230

Page: 230 / 234

230

Interface

STEP 1

﹒

Enter

Interface

Status

function; it will list the setting for each

Interface: (Figure18-1)

PPPoE Con. Time:

The last time of the RS-1200 to be enabled

MAC Address:

The MAC Address of the Interface

IP Address/ Netmask:

The IP Address and its Netmask of the

Interface

Rx Pkts, Err.

Pkts:

To display the received packets and error

packets of the Interface

Tx Pkts, Err.

Pkts:

To display the sending packets and error

packets of the Interface

Ping, WebUI:

To display whether the users can Ping to the

RS-1200 from the Interface or not; or enter its WebUI

Forwarding Mode:

The connection mode of the Interface

Connection Status:

To display the connection status of WAN

DnS/ UpS Kbps:

To display the Maximum

DownStream/UpStream Bandwidth of that WAN (set from

Interface

)

DnStream Alloca.:

The distribution percentage of DownStream

according to WAN traffic

UpStream Alloca.:

The distribution percentage of UpStream

according to WAN traffic

Default Gateway:

To display the Gateway of WAN

DNS1:

The DNS1 Server Address provided by ISP

DNS2:

The DNS2 Server Address provided by ISP

Summary of Contents for RS-1200











































































































































































































































Search results

Summary of Contents for RS-1200

Reviews:

Brands by name

Popular brands

AirLive RS-1200, User Manual

Search results

Summary of Contents for RS-1200

Reviews:

Brands by name

Popular brands