manualshive.com logo in svg

AirLive RS-1200, User Manual

Share
Download
AirLive RS-1200 User Manual Download Page 130

 

130

Define the required fields of Tunnel Function 

 

 

„

 

To display the VPN connection status via icon

。

 

 

Chart -- 

 

 

Meaning 

Not be applied  Disconnect Connecting 

 

Name:

 

„

 

The VPN name to identify the VPN tunnel definition. The name must be the only 

one and cannot be repeated

. 

 

Source Subnet:

 

„

 

Displays the Source Subnet. 

 

Destination Subnet:

 

„

 

Displays the Destination Subnet. 

 

IPSec / PPTP:

 

„

 

Displays the Virtual Private Network’s(IPSec Autokey, PPTP Server, PPTP Client) 

settings of    Tunnel function. 

 

Configure:

 

„

 

Click

 Modify

 to change the argument of VPN Tunnel; click

 Remove

 to remote the 

setting.(Figure11-4)

 

 

Figure11-4 VPN Tunnel Web UI 

 

Summary of Contents for RS-1200











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands