manualshive.com logo in svg

AirLive RS-1200, User Manual

Share
Download
AirLive RS-1200 User Manual Download Page 12

 

12

Chapter 2 

Configure 

 

 

 

The Configure is according to the basic setting of the AirLive RS-1200.   

In this chapter the definition is Setting, Date/Time, Multiple Subnet, Route 

Table, DHCP, Dynamic DNS, Hosts Table, and Language settings. 

 

 

Define the required fields of Settings 

 

AirLive RS-1200 Configuration:

   

„

 

The Administrator can import or export the system settings. Click 

OK 

to import the 

file into the RS-1200 or click 

Cancel

 to cancel importing. You also can revive to 

default value here. 

 

Email Settings:

   

„

 Select 

Enable E-mail Alert Notification

 under E-mail Settings. This function will 

enable the RS-1200 to send e-mail alerts to the System Administrator when the 

network is being attacked by hackers or when emergency conditions occur. (It can 

be set from Settings-Hacker Alert in System to detect Hacker Attacks) 

 

Web Management (WAN Interface):

   

„

  The System Manager can change the port number used by HTTP port 

anytime. (Remote WebUI management) 

After HTTP port has changed, if the administrator want to enter WebUI from 

WAN, will have to change the port number of browser.   

(For example: http://61.62.108.172:8080) 

 

Summary of Contents for RS-1200











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands