Chapter 3. Base Installation
AirLive MW-2000S User’s Manual
7
y
Power:
o
Light on:
The power is switched on.
o
Light off:
no power connected.
WAN1/WAN2:
The two WAN ports are connected to a network which is not managed by the AirLive MW-2000S
system, and this port can be used to connect the ATU-Router of the ADSL, the port of a cable modem, or a switch or
a hub on the LAN of a company.
LAN1~LAN4:
Clients’ machines connect to AirLive MW-2000S via LAN ports. Each LAN port can be configured to
one of the two roles, controlled or uncontrolled. The differences of these two roles for a client connected to are:
¾
Clients connected to the controlled port need to be authenticated to access network.
¾
Clients connected to uncontrolled port don’t need to be authenticated to access network and can access the
web management interface.
Rear Panel
y
Reset:
Press this button to restart the system.
y
Console:
The system can be configured via a serial console port. The administrator can use a terminal
emulation program such as Microsoft’s HyperTerminal to login to the configuration console interface to change
admin password or monitor system status, etc.
y
DC 5V:
The power adapter attaches here.
y
LAN1~4:
Connects to LAN1~4 port to access the network with authentication.
y
Private:
Connects to the private port to access the web management interface without authentication.
y
WAN1~2:
Connects to the Intranet or Internet by Switch.
LAN1 ~ 4
WAN1 ~ 2
DV 5V
Private
Console
Reset
Summary of Contents for MW-2000S
Page 1: ...MW 2000Sv2 Hotspot Management Gateway User s Manual ...
Page 23: ...Chapter 4 Basic Hotspot Configuration AirLive MW 2000S User s Manual 18 Setup Flow ...
Page 33: ...Chapter 5 Multi Service Providers AirLive MW 2000S User s Manual 28 Setup Flow ...
Page 58: ...Chapter 6 Multi Service Zones AirLive MW 2000S User s Manual 53 Setup Flow ...
