PinPoint CDMA User Guide Version 1.0
AirLink Communications, Inc.
Page 36
February 22, 2003
Command
Description
Effective
*NETIP
?
Query the current public (network) IP address of
the modem. This is the IP address that was
obtained from the embedded OEM Modem, and is
the address to which packets can be sent in order
to contact the modem from the Internet.
NOTE: This could be 0.0.0.0 if there is no current
network IP
*NETPHONE
?
Query the device’s phone number, if applicable.
*NETPW
=pw [?]
The password that is needed to login to the remote
network, if necessary.
*NETRSSI
?
Returns the current RSSI of the modem as a
negative dBm value.
*NETSTATE
?
Query the current network state. Will get one of
the following strings:
•
Connecting To Network
The modem is in the process of trying to
connect to the network;
•
Network Authentication Fail
Authentication to the network has failed.
Either
*NETUID
and
*NETPW
need to be
updated, or for some reason the network
refuses to allow the modem to connect;
•
Network Negotiation Fail
Network connection negotiation failed. This
is usually temporary and often clears up
during a subsequent attempt;
•
Network Ready
Modem is connected to the network and ready
to send data;
•
Network Dormant
Modem is connected to the network, but the
link is dormant. It will be woken up when
data is sent;
•
No Service
There is no network service (e.g., no CDPD,
or no 1xRTT);
•
Hardware Reset
The OEM modem is being reset. This is
temporary.
*NETUID
=uid [?]
The login that is needed to login to the remote
network, if necessary.