AIRIS Praxis N1204 User Manual Download Page 206

Page: 206 / 268

Modules & Options

7 - 80 Trusted Platform Module

Trusted Platform Module (TPM) Driver Installation

Make sure you have enabled and activated the TPM in the BIOS before

installing the driver (if you do not do see the note below).

2. Insert the

Device Drivers & Uti User’s Manual

disc

into the DVD

drive.

3. Click

Option Drivers

(button).

4. Click

6.Install TPM Driver > Yes

5. Click

Install

> Next

6. Click the button to accept the license and click

Next

7. Click

Next

> Next > Install

8. Click

Finish

> Yes

to restart the computer.

If you have installed the driver without enabling and activating the TPM first, a con-
firmation message will appear on restart.

Press

F10

to enable and activate the TPM and you can then configure as overleaf.

However it is recommended that you enter the BIOS and take ownership (see page

7 - 78

) of the TPM before configuration in

Windows

. Alternatively press

Esc

to con-

tinue without making changes the TPM.

Figure 7 - 62

TPM Confirmation

Message

(if the driver is installed
without TPM being en-
abled and activated in the
BIOS)

Summary of Contents for Praxis N1204













































































































































































































































































Search results

Summary of Contents for Praxis N1204

Reviews:

Brands by name

Popular brands

AIRIS Praxis N1204, User Manual

Search results

Summary of Contents for Praxis N1204

Reviews:

Brands by name

Popular brands