manualshive.com logo in svg

AIRIS Praxis N1204, User Manual

Share
Download
AIRIS Praxis N1204 User Manual Download Page 190

Modules & Options

7 - 64 3.75G/HSPA Module

7

SIM

Most USIM cards are protected by a Personal Identity Number (PIN). You may turn
on or off the 

Request PIN at startup

 (click 

Apply

 to save any changes). You can

also 

Change PIN

 (you will need to enter the new PIN in the two fields provided and

click 

Apply 

to save any changes).

Radio

Radio needs to be turned on before you can make any connection (note this is not
the same as powering the module off/on using the 

Fn + 

 

key combination), but

you may turn it off when required. 

Automatic

 mode is the recommended setting for

most 3G networks as it will use 3G where available. All 

Frequency band

s are se-

lected as default (click 

Apply

 to save any changes).

PIN Notes

You will have to enter
your current PIN to
change the PIN settings.

Request PIN at startup

will apply only after you
have shut the computer
down and restarted it
(not just restarted). 

Radio & Power 

Saving States

You can choose to have
the radio turned on or off
during 

Hibernate

 or

Sleep

 power saving

states.

Figure 7 - 47

Advanced Settings 

SIM & Radio

Summary of Contents for Praxis N1204













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands