User manual
–
HEPA
Bulle
–
ED02_09-August-2021
10 /31
1.6.4 PHYSICAL CHARACTERISTICS
Electrical supply
~ 230 V (+/- 10% max.); 50/60 Hz
Maximum electrical power
280 VA / 170 W
Electrical power at rated speed (450 m
3
/h)
30 VA / 20 W
Electrical protection
-
Isolated by removable power cable
-
Ph + N FUSES (3.15 A)
Volume output
Ventilation speeds adjustable from 200 m
3
/h to 1,000 m
3
/h
Boost mode: 1300 m
3
/h
Device noise level
according to standard NF-EN ISO 3744:2012 at 1 m / 2 m
(new filters)
-
200 m
3
/h
30 dB(A) / 26 dB(A)
-
400 m
3
/h
42 dB(A) / 38 dB(A)
-
800 m
3
/h
54 dB(A) / 50 dB(A)
-
1200 m
3
/h
63 dB(A) / 59 dB(A)
Average velocity of air exiting diffusion grilles
0.45 m/s at 450 m
3
/h
Air treatment capacity (room volume)
Potentially all volumes according to desired level of efficiency.
Water/solids protection index
Complete device
IP40
Control panel
IP40
Overall dimensions
H 402 x W 418 x D 427 mm
HEPA
Bulle
weight
With filters: 14 kg
Without filters: 9 kg
Environmental operating range
Temperature
+5°C to +35°C
Relative humidity
< 95% non-condensing
Altitude
Up to 2000 m
Overvoltage category
CAT II
Pollution degree
2
Environmental storage range
Temperature
0°C to 45°C
Relative humidity
20% to 90%
Dust level
< 1 mg/m
3
NOTE:
The information contained in this table is for information only. For any information on
measurements and tolerance intervals, please contact
air
in
space
®
at the address provided
at the end of this document.
