User manual
–
HEPA
Bulle
–
ED02_09-August-2021
12 /31
1.8
INSTRUCTIONS FOR REMOVAL AND STORAGE
1.
Switch off the device and unplug it from the mains.
2.
Place the unit in its original box.
3.
Arrange the power supply cable.
4.
Move the box to its storage area.
5.
The unit must be stored in a clean area with an atmosphere not polluted by industrial activities.
The unit must be protected from dust, direct sunlight, heat sources, frequent changes in temperature and
humidity, potentially corrosive chemicals or other products.
Storage temperature
: 0°C to +45°C.
Relative humidity level
: 20% to 90%.
Dust level
: less than 1 mg/m
3
.
1.9
TRANSPORT
Before transporting, protect the unit from shocks and scratches.
Follow the instructions regarding the transport box direction:
1.10 DISPOSAL
This product is covered by European Directive 2012/19/EU of 4 July 2012 on waste electrical and
electronic equipment (WEEE) and falls within category 6. “Electrical and electronic tools” as defined in
annex I to this directive.
Disposal of this product and the recovery of the resultant waste must respect regulations arising from the
application of the European directive by the different member states, as well as any local regulations that
complement it.
