Page 5 of 8
The iCON 15 and iCON eco15 requires a 110mm diameter hole through the ceiling. The fan
should be fixed, with the screws provided, through the plaster board into the support.
The iCON30 will require a 160mm diameter hole and the iCON60 a 190mm hole.
Surface Mounting Fans on the Ceiling
When surface mounting the iCON30, the mounting skirt should be used.
The iCON30 requires a 110mm diameter hole through the ceiling and the iCON60 a 170mm
diameter hole. The surface mounted skirt to be fixed, with the screws provided, through the
plaster board into the support. The fan is then fitted into the skirt.
Where flexible duct is used the diameter must be maintained.
POSSIBLE CABLE
ROUTING
DUCT
PLYWOOD
JOIST
MOUNTING SKIRT
