AFLR48
Ceiling Sweep Fan Installation Instructions
2
of 4
© Clipsal Australia Pty Ltd
1.0
Mounting the Fan Support Bracket
Select a suitable location to mount the fan support bracket.
The mounting bracket must be fixed to a solid structural member
such as a ceiling joist or a securely fixed noggin and be capable
of supporting 15kg.
Additionally, it must be located so as to provide the blade with a
minimum clearance from the floor of 2100mm, and from other
obstructions of at least 300mm.
Secure fixing to support 15kg
Hangsure Mounting
2.0
Fitting the Blades
Fit the blades onto the fan motor, as shown in Diagram 2.
Rattan blades
Fit blades with screws and washers provided as illustrated in
Diagram 2. Rattan blades may be mounted above or below the
metal brackets and blades may be mounted with either side
facing up.
3.0
Connecting the Light Fitting
If you are attaching a light fitting to the fan, do so prior to hanging
the fan.
NOTE:
Clipper Light (CL) and Oyster Light (OL) may be installed in fans
which are constructed for this purpose.
1. Unscrew the plastic nipple from the bottom of the
motor housing.
2. Pull out the light wires from the motor housing for connection
with the lamp holder.
3. Insert the light wires through the adaptor, then screw the
adaptor into the motor shaft.
4. Connect the light wires to the lamp holder then screw the
lamp holder and the adaptor together firmly.
Light Wires
Adaptor
Lamp Holder
Light Wires
Plastic Nipple
Guide Pin
Slot
4.0
Hanging the Fan
Hangsure Bracket
Position the ball-joint in the bracket so that the guide pin on the
bracket engages in the slot of the ball-joint.
5.0
Connecting the Fan
All Airflow Ceiling Sweep Fans are pre-wired to allow for a light to
be fitted onto the fan.
If you are not fitting a light to the fan, please disregard the light
wires. The wires are connected to the incoming wiring as
illustrated in the below diagram.
SWITCHED
ACTIVE (Fan)
NEUTRAL
SWITCHED ACTIVE
(Optional Light)
EARTH
BROWN
BLUE
BLACK
RED
GREEN
Light
Motor
Diagram 2
Fit canopy cover and
tighten screws
