AFLR48
Ceiling Sweep Fan Installation Instructions
3
of 4
© Clipsal Australia Pty Ltd
Requires additional components (not supplied with this fan)
including;
- Clipsal 30M Switch Mechanism
- Two Gang Grid Plate and Cover.
8.0
Operating Instructions
• Turn the knob to speed 3 (top position). This will start the
blades spinning.
• Once the blades are spinning you can select a lower speed
if desired.
• The speed setting is always located at the top position of the
knob as illustrated below.
Fan with Light
COM
ACTIVE
SWITCHED
ACTIVE (Fan)
2
1
3
Capacitor
COM
L
2
1
SWITCHED
ACTIVE (Light)
7.0
Connecting the Speed Controller
with a Light Switch
6.0
Connecting the Speed Controller
All Airflow Ceiling Sweep Fans come complete with a three
speed flush fitting capacitor controller.
This controller fits to standard 84mm fixing centres, the same as
a normal switch or power point.
Although supplied standard in the vertical format, the mechanism
can be rotated 90° to provide a horizontal format if required.
Three is the highest speed, one is the lowest.
• Remove switch surround.
• Terminate cables as illustrated in the below diagram.
• Active to Common and Switched Active to terminal one.
• Fix controller to wallbox or bracket using screws provided.
• Screws may need to be shortened for some applications.
• Replace switch surround.
Fan Only
ACTIVE
SWITCHED ACTIVE
(TO FAN MOTOR)
COM
2
1
3
Capacitor
RED
ORANGE
PURPLE
3
2
OFF
1
Top Position
Rotary Switch Mechanism
Clipsal 30M Switch
Mechanism
Rotary Switch
Mechanism
