CR12 - CR165 50/60Hz
CONDENSERS
Dimensional & Installation Data
Re-Orientation To Vertical Discharge
1 Remove the fixings securing the unit to the pallet.
2 In line with horizontal discharge lifting instructions, lift the unit sufficiently to gain access to the lower leg fixings.
3 Reposition and secure the lower 2 legs to the corner of
the unit using the fixings and hole positions provided to
both faces.
Note, model sizes CR80 & CR105 have an additional mid
support leg, this should also be adjusted and secured.
4 Lower and rest the unit down to floor and reposition and secure the upper legs as described in Step 3.
5 In line with vertical discharge lifting instructions lift the unit slowly into vertical orientation.
19
Condenser Technical Manual 6666879 V1.2.0_05_2013
Ins
ta
lla
tio
n
