5.
System Preparation
Chapter 5
System Preparation
55
HOLD AirLeash
Display DOWN
HOLD AirLeash
Display UP
19. Hold AirLeash steady and at a 90º angle (respective to the
ground level) until you see a message: “Rotate AirLeash 360
degrees” and hear the “calibrating” tone, only then start rotating
360 degrees.
20. After a full rotation AirLeash will display the next message “Hold
AirLeash display DOWN”:
21. Hold AirLeash steady and at a 90º angle (respective to the
ground level) until you hear the “calibrating” tone, only then start
rotating 360 degrees.
22. Continue rotating until you’ll hear a “success” tone and then
turn AirLeash display UP so you see the message “Calibration
COMPLETED Press OK” short press on Power/OK to
complete calibration process.
23. During calibration you may get two error messages:
Summary of Contents for AD10
Page 102: ...airdog com ...
