Chapter 5
System Preparation
43
5.
System Preparation
General Guidelines And Warnings
5.2.2
!
• Never charge the battery unattended. Always charge the battery on a
non-flammable surface such as concrete and away from any
flammable materials.
• Lithium Polymer batteries are volatile. Failure to read, understand and
follow the below instructions may result in fire, personal injury and
damage to property if charged or used improperly.
• Always use original AirDog batteries and battery chargers. Failure to do so
may cause a fire, which may result in personal injury and
property damage.
• Do not disassemble, pierce, distort or cut the battery or the battery
charger. It may result in a risk of electric shock or fire.
The battery will automatically switch to Sleep Mode if it is connected
to an unpowered charger for more than 30 minutes. The battery will
resume charging after you’ve disconnected then connected it again to the
powered charger.
If a damaged battery is connected to the powered charger, the LED
indicators will display an error code (see 4.3.4 Error And Status Codes)
and the charging process will not start.
Pressing the battery button while the battery is charging provides status
codes used for service purposes only.
Normal charging time should take 3 hours and AirDog’s battery is
rechargeable for over 100 full cycles. A full cycle is when AirDog’s battery
is charged from 0% to 100%. After 100 cycles, AirDog’s battery may
provide less than 80% of its original capacity.
!
• The red banana jack connects into the red terminal on the battery
charger and the black banana jack connects into the black terminal on
the battery charger. Do not reverse banana jacks and battery charger
terminals at anytime.
• Fully charge the battery before each flight.
Summary of Contents for AD10
Page 102: ...airdog com ...
