Strona 60
Fig 3-8
Fig 3-9
Fig 3-10
3. INSTALLATION METHOD
7. Wiring
Cutting place of top
side wire outlet
Cutting place of left
side wire outlet
Cutting place of right
side wire outlet
A. For wiring in the slot, four outletting positions.
There are three need cutting.
Diameter of wall hole
:
Φ20mm
Embedded switch
box wiring
B.Shielded wiring
Wiring
hole
Wiring through the wall
Wall hole and wiring hole
Putty
Putty
Putty
Trap
Trap
Trap
CAUTION
Avoid the water enter into the wired remote controller, use trap and putty to seal the
connectors of wires during wiring installation. (
Fig.3-10
)
When under installation, reserve certain length of the connecting wire for convenient
to take down the wired remote controller while during maintenance.
Top side
wire outlet
Left side
wire outlet
Right side
wire outlet
Bottom side
wire outlet
Line groove
Line groove
Line groove
Line groove
Strona 61
4. SPECIFICATION
DC 5V/DC 12V
RH40%~RH90%
Input voltage
Ambient temperature
Ambient humidity
Fig 3-11
3. INSTALLATION METHOD
All the pictures in this manual are for explanation purpose only.
Your wire controller may be slightly different .The actual shape shall prevail.
8.Reattach the upper part of the wire controller
After adjusting the upper case and then buckle the upper case; avoid clamping the
wiring during installation. (
Fig 3-1
1)
Summary of Contents for MDV DCTB-24R32IVT IN
Page 82: ... Strona 82 ...
Page 83: ......