Strona 56
Applicable to KJR-120C1/TF-E only
Applicable to KJR-120C1/BTF-E only
3. INSTALLATION METHOD
Fig 3-1
Fig 3-2(a)
Fig 3-2(b)
1.Wired remote controller structure size figure
2.Wiring Principle Sketch:
red
black
yellow
brown
red
black
yellow
brown
Insert of the
mainboard CN40
Wire controller
Indoor unit mainboard
4-Core Shield Cable, the length
is decided by installation
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
red
black
yellow
brown
red
black
yellow
brown
Insert of the Multi-function
control box CN5
Wire controller
Indoor unit Multi-function control board
4-Core Shield Cable, the length
is decided by installation
-----------------------------------
-----------------------------------
-----------------------------------
-----------------------------------
120
122
18.5
83.5
46
62
Strona 57
3. INSTALLATION METHOD
Fig 3-4
Connect the female joint of wires group from the mainboard with the male joint of
connective wires group. (See Fig.3-3)
Please connect the other side of connective wires group with the male joint of
wires group leads from wire controller. (See Fig.3-3)
Fig 3-3
Mainboard
4-core shielding wire
3.Wiring figure
4.Remove the upper part of wire controller
The connective wires group-1
The connective wires group-2
CN40
Insert a slot screwdriver into the slots in the lower
part of the wire controller (2 places), and remove
the upper part of the wire controller. (Fig.3-4)
Slots
NOTICE
The PCB is mounted in the upper part of the wire
controller. Be careful not to damage the board
with the slot screwdriver.
Summary of Contents for MDV DCTB-24R32IVT IN
Page 82: ... Strona 82 ...
Page 83: ......