Page 5
SET-UP AND TESTING
The Air-Care TruckMaster II
provides a 2 Speed Duct Cleaning
Motor and Brush and a 1.5” x 35
ft Vacuum Hose with 2” hose cuff
and 12” Disposable “Pancake”
brush, (Optional 2”x35 ft Hose and
18” brush). Vacuum is supplied by
connecting the hose to a Truck
Mounted Carpet vacuum machine.
Since Ducts contain dry debris and
Carpet Vacuums usually require
the debris to be wet to protect the
Blower wheel and reduce dust, it
is advised that the Dust Damper
be connected between the Carpet
Vacuum Hose and the TruckMaster
Hose. It will also have a solution hose connector to provide just plain water at the lowest pressure and
flow rate to the Dust Damper, usually 100 to 200 psi.
A
Turn off the Power switch on the panel and plug the power cord into a suitable 120-volt outlet.
B
Attach the Brush power cable from the Vacuum hose to the round connector on the control panel.
KEEP THE BRUSH AWAY FROM ANYTHING BREAKABLE or ANYTHING WITH A POWER CORD
OR ROPES OR TUBES BEFORE POWERING ON.
The Rotating brush can quickly wrap up any loose material and it does “WALK” across the floor rapidly
when turned on.
BE CAREFUL
, it is normally operated inside of an Air Duct. The optional 220/240 Volt
Air-Care TruckMaster II operates in the exact same way as the 120-volt version.
C
Brush “RUN / STOP” switch
D
Brush “CHANGE ROTATION” Switch
E
“HI /LOW” switch to control the speed and Torque of the Brush.
Continued on Page 6...
TruckMaster II
A
B
C
D
E
Summary of Contents for TRUCKMASTER II
Page 1: ...Page 1...
