Page 4
UNPACKING INSTRUCTIONS
SAFETY PRECAUTIONS
Remove the outer box and inspect for damage. Report all damage immediately to your carrier. If
special set-up instructions are required, they will be taped to the outside of the equipment or in the
“Operating” section of this manual.
Inspect all the packing material for small parts before discarding packaging material. Report all
damage to your Carrier immediately then notify Air-Care. Any attempt at repairing suspected damages
may void warranty.
CHECK THAT ALL PARTS ARE PRESENT
Air-Care TruckMaster II
• Air-Care TruckMaster II with High and Low power switch for Brush Motor
• Hose, 1 ½” X 35’ Brush and Motor Assembly. Includes 12” Firm Pancake-Style Brush
• Universal, Wireless Remote Control (Including 2 x AAA Batteries)
• Dust Damper
• Hose Coil and Carry Strap with Handle
Always think safety and use common sense precautions when working with Air-Care equipment. Do
not block walkways with equipment and remove delicate and breakable articles from the immediate
work area. The following are precautions that should be reviewed by all persons who will be involved in
the cleaning activity.
• Inspect AC power plugs to be sure the ground pins are in place.
• Never connect power to Air-Care equipment unless all covers and safety shields are in place.
Mechanical and electrical parts could activate without warning and cause injury.
• Never allow anyone but a properly trained technician to use the equipment for cleaning products.
• All Air-Care equipment is designed for US standard 115-volt, 60 Hz AC. The Air-Care TruckMaster
II is optionally available in 220/240 Volt, 50/60 Hz Power. Always check the specifications on the
equipment before connecting electrical power to Air-Care Equipment.
If you have questions about the safe use of any Air-Care product, call 702-454-5515.
Equipment specifications and part numbers are subject to change without notice.
TruckMaster II
Summary of Contents for TRUCKMASTER II
Page 1: ...Page 1...
