2
HUMIDIFIER QUICK SET UP
Use these basic instructions for setting up your unit.
Use the “Detailed Set Up” on page 6 for additional set up and operational information.
NOTE:
To simplify instructions, model 836000HB is featured in most illustrations.
Images of the 831000 unit are included where needed.
a. OPEN
THE CARTON AND LIFT OUT OF THE CHASSIS (TOP SECTION)
b. NOTE THE FLOAT ROD STICKING UP THROUGH THE INNER PACKING.
c. CAREFULLY FREE THE FLOAT ROD FROM THE CARDBOARD PACKING.
d. REMOVE THE CARDBOARD INNER PACKING.
e. DO NOT THE DISCARD THE SMALL STYROFOAM CUBE.
IT IS NOT PACKING
.
UNPACK HUMIDIFIER
INVERT THE BASE AND
INSTALL THE CASTERS
REMOVE THE FLOAT ROD
FROM PACKIN
G
INSTALL THE FLOAT
ROD IN THE BASE
LIFT OUT THE CHASSIS
UNPACK UNIT
REMOVE THE
PARTS BAG
AND OTHER CONTENTS
FROM BASE
INSERT
CASTERS
UNTIL
SHOULDER
IS FLUSH
WITH FLOOR
OF BASE
TWIST
RETAINER
TO SECURE
FLOAT ROD
ASSEMBLE CONTENTS OF BASE
ENSURE THE STY-
ROFOAM FLOAT IS
ATTACHED
TO FLOAT ROD
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
