8
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
Model 836000HB (analog controls with digital display screen)
Turn On and Set Controls
.
1.
Press the fan/power knob once to turn the unit on. Two dashes (--) will
appear on the display.
2.
Rotate the fan knob clockwise to set the fan
level. The fan speed proceeds from low (F1) to high
(F3). NOTE: The knob will rotate freely clockwise.
To decrease the fan speed, turn the knob counter-
clockwise.
3.
Rotate the humidity knob clockwise to set the
percentage of desired humidity. The range for set-
ting the humidity is from 25% to 65%, and goes up
in 5% increments. Lower the level by rotating the
humidity knob counterclockwise.
OPERATION:
35
Model 831000 (full digital controls)
Turn On and Set Controls
1. Press the power button once to turn unit on.
Two dashes (--) will appear on the display.
2.
Adjust the fan speed by pressing the fan
button . The display will show the fan
speed as it proceeds from low (F1) to high (F3).
3.
Press the humidity button to set the percent-
age of desired humidity. The range for setting the
humidity is from 25% to 65% and goes up in 5%
increments as the button is pressed. Once 65% is
reached,
the cycle starts over again at 25%.
35
Humidifier Status Indications
Refill Indication
: When the reservoir is empty, an
F
displays on the LCD screen.
Check Filter
: After every 720 hours of operation a reminder to check the
filter/wick condition is programmed to show
CF
on the display. Check the
condition of the filter/wick, and change it if necessary. Clear the
CF
display
by unplugging the humidifier, waiting 60 seconds, and plugging it back in.
Control Lock:
You can lock the controls to avoid unwanted changes to
your settings by pressing and holding the power button down for five
seconds.
CL
will display for a few seconds, then resume displaying room
humidity. Turn off this feature by holding down the power button for five
seconds.
Common to All Models
