2
HUMIDIFIER QUICK SET UP
Use these basic instructions to quickly set up your unit. Use the “Detailed Set Up
Instructions” on page 6 for additional set up and operational information.
UNPACK HUMIDIFIER
1. OPEN THE CARTON AND REMOVE PACKING AND LITERATURE ON TOP.
2. LIFT OFF THE CHASSIS, THEN PULL THE CABINET OUT OF THE CARTON.
VERIFY CONTENTS INSIDE CARTON
•
FILLER HOSE
•
FOUR CASTERS
•
WICK
•
TWO WATER BOTTLES WITH CAPS
•
FLOAT AND SUPPORT WITH TWO SCREWS
•
AIR FILTER
•
MANUAL
FLOAT
SUPPORT
3. INSTALL THE FLOAT ASSEMBLY
INTO THE ROUND GUIDES ON THE
FLOOR OF THE BASE WITH THE
TWO SCREWS AND A PHILLIPS
SCREWDRIVER.
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
ASSEMBLE THE UNIT
1. EMPTY THE CABINET OF ALL
CONTENTS AND INVERT IT TO
INSTALL THE CASTERS.
2.
TURN THE CABINET OVER TO IN-
STALL CONTENTS. REMOVE THE TWO
SCREWS TAPED TO THE FLOAT SUP-
PORT. INSERT THE FLOAT INTO THE
FLOAT SUPPORT.
REMOVE CASTERS
FROM PARTS BAG,
AND INSERT THEM
UNTIL SHOULDER
IS FLUSH WITH THE
FLOOR OF BASE.
4. INSTALL THE WICK INTO THE CAB-
INET FLOOR. HOOK THE FRAME
ONTO THE LEDGE AT
THE BACK.
FLOAT
