XT-400/800 Operating Instructions
10
level for 30 minutes to burn off any accumulated dirt buildup.
Another cleaning option is to remove the ozone elements (be careful not to snap or
damage the wire connectors) and soak them in a warm water/Dawn dish detergent mix.
Only a small amount of Dawn is needed. Let the elements soak for an 10-20 minutes
and then rinse in warm water. Then let them air dry on a towel overnight.
There is a small electrostatic 3M “Filtrete" air filter pad on the backside of the generator
to keep dust from entering the unit. When the filter becomes dark or dirty, usually
between two and three months, the user should replace the filter with one of the
replacement filters included. Do not reuse the old filters.
The unit comes supplied with a one-year supply of filters. After that the user may
purchase additional replacement filters from Air-Zone, Inc.
The corona elements inside may eventually burn out or become so dirty they will need
to be replaced. If you suspect the unit has a burnt out element, turn the ozone level to
its highest setting and turn the light out in the room. If one of the elements is not glowing
purple, or is glowing very dimly, then that element may need changing.
There are 3 elements in the XT-400 and 6 in the XT-800.
Elements are grouped together so that each transformer has a group of three. If three
elements appear to be out, the unit may have a bad transformer. If the unit is an XT-800
please check the half power switch.
If you have a blown element or transformer please contact Air-Zone for a replacement.
The corona elements should last for years and are reasonably inexpensive.
Warranty Information
Every Air-Zone ozone generator is checked to ensure perfect working condition before it
is shipped, and is under warranty from manufacturing defects for a period of five years.
