24
2109100018L29 1608V002
Use
i
Place the camera with spacer onto the corre-
sponding tooth
i
If the image is not sharp, press one of the two
focus buttons
The camera focuses
i
Press one of the two capture buttons
The camera switches to Freeze mode The
still image is transferred to the imaging soft-
ware
i
Edit the image in the imaging software and
save (For further information, refer to the soft-
ware manual)
i
Analyze the image (see "Analysis")
i
To switch back to Live mode, press the cap-
ture button again
Putting on the spacer
WARNING
Danger of cross-contamination when
used without preparation or following
incorrect preparation
i
Sterilize the spacer in the steam steril-
izer (see "113 Preparing the spacer")
before each use
i
Place the spacer onto the interchangeable
head from above Make sure that the spacer
does not cover the optical element of the in-
terchangeable head
Taking a picture
CAUTION
The blue-violet LED light
i
Do not peer into the light source
i
Do not use or point the camera directly
at the eyes
Prerequisites:
– Camera connected with the computer
– Imaging software started
– Camera in hygienic protective cover
– Spacer placed on
i
Reduce the penetration of external light Turn
off or dim sources of external light (eg oper-
ating lights)
i
Dry the row of teeth with compressed air
EN
US
