Page 13
Air Techniques, Inc.
9 Installation
The following tools are required:
- two adjustable wrenches nominal diameter 41mm
The electrical circuit diagram can be found in the
control unit�
9�1 Connect the compressor module to the
cyclone separator
9�2 Connect the pressure tank to the com-
pressed air supply net
• Connect the pressure tank to the supply network using
a flexible compressed air hose
• (on-site connection: 1 inch NPT external thread)�
9�3 Connect the condensate drain outlet to the
waste water system�
The condensate is led with-
out pressure via the condensate separator collector
to the waste water system�
When carrying out connections to the waste water
system observe national and local regulations on-
site (siphon etc�)�
• Connect the condensate drain outlet to the waste
water system�
Summary of Contents for AirStar AS120
Page 2: ......