8
2. With one hand supporting the filter near the
turnstiles, rotate the two turnstiles to the open
position.
3. Remove the filter from the unit and discard. It can
not be vacuumed, washed or reverse air blasted.
4.
Be extremely careful when handling the new
filter. A damaged filter will compromise the air
cleaning efficiency.
REPLACING THE ODOR/VAPOR FILTERS OF
CM-12 STANDARD UNITS
The standard MiracleAir™ Model CM-12 comes with
two disposable filters that must be replaced on a
periodic basis. These filters are located at the exhaust
ends of the air cleaner just inside the discharge grilles.
1. Remove both of the discharge louvers. This
requires a Philips screwdriver. Handle the louvers
with care.
2. Remove the odor/vapor filters by sliding them out
from the discharge ends of the air cleaner. The
filters are resting in tracks inside the cabinet.
There is no locking mechanism to release.
REPLACING THE ODOR/VAPOR FILTERS OF THE
CM-12 DELUXE UNITS
The standard MiracleAir™ Model CM-12 comes with
two VOC filters that must be replaced on a periodic
basis. These filters are located at the exhaust ends of
the air cleaner just inside the discharge grilles.
1. Remove both of the discharge louvers. This
requires a Philips screwdriver. Handle the louvers
with care.
2. Remove the odor/vapor filters by sliding them out
from the discharge ends of the air cleaner.
3. Place the filter module on a tabletop or work-
bench. Unscrew the two thumbscrews and
remove the retaining bracket. Slide the ten
disposable filter panels out of each module and
replace with the new filter panels.
4. Slide the odor/vapor filter back into the air cleaner
until it hits the stops in back.
5. Replace the discharge louvers and make sure
they are securely fastened.
Summary of Contents for MiracleAir CM-12
Page 6: ...6 ELECTICAL SCHEMATIC...
Page 9: ...9 PARTS LIST AND DIAGRAM...
