Continuous drainage
Plug the provided water hose to the drain
hose outlet of the device
⑥
and the other
to a floor drain or a suitable drainage facility
like a sink or a flush. Cut off the plastic cover
located at drain hose outlet by a scissor.
The drainage facility should be lower than
the drain outlet of the unit. Make sure the
connection of the water hose and the drain
hose outlet is tight and do not let the water
leak.
Tank drainage
·
Unplug the device.
·
Remove the tank and empty it.
·
Replace the tank.
·
Egoa
is now ready to work again.
·
Egoa
automatically stops when the tank is full.
Maintenance
·
Before any operation, unplug the device.
·
Empty the water from the tank and rinse
off with clear water. If needed, use a soft
detergent.
·
Check if the back vent is not dusty. If needed,
clean it with a dry brush or a vacuum.
·
Do not splash the device. If needed, use a wet
cloth.
·
Filters cleaning:
·
Clean the filter with warm soapy water. Rinse
and let the filter dry before replacing it.
Storage
·
When not using the unit for a long time, after
turning off the unit, wait a day before emptying
the tank.
·
Clean as previously recommended with a white
vineagre based solution.
·
Let the device dry.
·
Store in a dry place, preferably in its original
packaging. Avoid high temperatures.
Precautions
·
Check that the device is not swamped.
·
Do not use bleach or abrasives to wash the
device. Use water and mild detergent.
·
Do not use the appliance outdoor.
·
Place the device on a hard surface.
·
The device is suitable for use at temperatures
between 5 and 35°C.
·
Allow at least 20 cm of space on all sides of
the unit for good air circulation.
·
Do not connect the dehumidifier to a
multiple socket outlet, which is also being
used for other electrical appliances.
·
Plug the unit to an electrical socket with
earth conection.
·
The dehumidifier must be operated in an
enclosed area to be more effective.
YES
No
10
