Abnormal noise.
Resonant in water tank
when water level is too low.
Fill water into water tank.
The unit is on a unstable
surface
Move the unit to a stable flat
surface.
The unit leaks.
The tank is not filled in the
right way.
Turn over the tank, unscrew the
cover, and fill in with water
(see Tank filling section).
The tank cap is not well
closed.
Make sure the tank Cork is rightly
tighten.
Seal tank cap fell during
filling.
Replace the seal in the cap. Take
the opportunity to clean with soap
and water!
The indicated
hygrometry rate
does not change.
The room is too big.
Compare with another hygrometer
in order to check if the device's
hygrometer is defective.
The sensor is dirty.
Clean the hygrometer. Blow into
the sensor to dislodge eventual
dust particles (locate the sensor on
the scheme "
⑦
").
The information
(temperature and
humidity level) seem
to be incorrect.
The sensors respectively
have a margin of error.
Thermometer: ±2°C
Hygrometer: ±5%
The product does not work properly (2/2)
15
