manualshive.com logo in svg

Air Monitor ELECTRA-flo G5, Installation, Operation And Maintenance Manual

Share
Download
Air Monitor ELECTRA-flo G5 Installation, Operation And Maintenance Manual Download Page 10

1050 Hopper Ave, Santa Rosa, CA 95403  • Tel (800) AIRFLOW • www.airmonitor.com [email protected] 

ELECTRA-flo G5 Transmitter Thermal Airflow & Temperature Measurement System  1015-3 - 07/18

10

SERVICE MENU SELECTION DESCRIPTION

Password Configuration

Enable/disable and change password

Total System Scan

Displays sensor enabled/disabled status

Sensor Control

Enable or disable system sensors

Sensor Data Scan

Displays individual sensor data

Sensor Alert Scan

Displays alert codes for each sensor 

Custom ID

Configure ID (tag) of unit (also device name displayed in BACnet)

Restore Factory Setting

Restores display settings to original factory setup

Product Information

Displays product information (Serial number, Work Order #, etc.)

MAIN MENU System1 & System2 (Dual Channel Version Only)

MAIN MENU SELECTION

DESCRIPTION

Density Compensation

Select density compensation type for flow output (Actual or Standard CFM)

Select System of Units

Select system of units (US or SI)

Select Units of Measure

Select velocity and flow units

Flow Configuration

Select and configure flow and application parameter (ducted or fan inlet, duct 

size, fan inlet diameter, etc.)

Display Configuration

Set brightness and inactivity timeout interval

Analog Output Configuration

Configure analog output type, value and averaging filter

Display Averaging Filter

Configure display averaging filter

Zero Lockdown

Adjust zero lockdown (below a FPM set point, drives display and output to zero)

Alarm/Alert Configuration

Configure alarm type, upper and lower limits

Field Characterization

For information on field characterization, please see page 19 below

SERVICE MENU System-1 & System2 (Dual Channel Version Only)

 

SERVICE MENU SELECTION DESCRIPTION

Password Configuration

Enable/disable and change password

Total System Scan

Displays sensor enabled/disabled status

Sensor Enable/Disable

Enable or disable system sensors

Sensor Data Scan

Displays individual sensor data

Sensor Alert Scan

Displays alert codes for each sensor 

Custom ID

Configure ID (tag) of unit (also device name displayed in BACnet)

Restore Factory Setting

Restores display settings to original factory setup

Product Information

Displays product information (Serial number, Work Order #, etc.)

Configure Probes vs. Nodes

Configure Number of probes and sensors per probe

NETWORK CONFIGURATION DESCRIPTION

Network Configuration

Configure BACnet MS/TP or MODBUS RTU Network Connection

Summary of Contents for ELECTRA-flo G5



























Reviews:

No comments

Brands by name

Popular brands

Load more brands