•
Apply to
: You need to select whether the filtering rule should apply to packets outbound
for the Internet or inbound from the Internet.
•
Source IP address
: you can select
Any
,
Single IP
, or a
Network
(of source IP ad-
dresses).
•
Source Port
: you can select
Any
,
Single
, or a
Range
of port numbers.
•
Destination IP address
:
Any
,
Single IP
, or a
Network
(of destination IP addresses).
•
Destination Port
: you can select
Any
,
Single
, or a
Range
of port numbers.
After you finish the above, you press the
ADD
button to add the entry to the table. There are up
to 32 IP filtering rules could be configured.
You can delete an entry by selecting the corresponding entry and press the
DELETE SE-
LECTED
button.
Please Note that IP filtering is a sophisticated feature that can severely impact your Router op-
eration. Please be sure that you fully understand it before you use this feature. If you make any
mistakes, it can produce dramatic and potentially undesirable results.
37
Summary of Contents for WLA-500AP
