If you choose to use an external DHCP Server to automatically assign an IP address to your WLA-
5000AP check the button that says, “
Use the DHCP protocol to automatically get the IP address
for this device
”, and then press
Next
to the next screen.
When an IP address is
dynamically
assigned to the router, its value can change depending on the IP ad-
dress assignment policy used by the DHCP server in the network. Since you need to use an IP address
to control and manage your WLA-5000AP, without the knowledge of its IP address, in order to access
it, you will need to use UPnP (Universal Plug and Play) or other management tools that do not depend
on a fixed IP address.
It is strongly recommended that you select the manual static IP address.
C O N F I G U R E Y O U R W I R E L E S S L A N C O N N E C T I O N
In the following configuration screen, you can configure wireless related parameters of your
WLA-5000AP:
Network Name (SSID):
The SSID is the network name used to identify a wireless network. The
SSID must be the same for all devices in the wireless network. Several Routers on a network can have
the same SSID. The SSID can be up to 32 characters long. This SSID is used for both radios (i.e.
802.11a and 802.11 b/g).
Disable SSID Broadcasting:
An access point periodically broadcasts its SSID, along with other in-
formation, which allows client stations to learn its existence while searching for Routers in the wireless
network. Select
Disable
if you do not want the device to broadcast the SSID.
Regulatory Domain:
This place shows the regulatory domain where the device is running. This field
cannot be changed by regulation.
WLAN standard for Radio 1/2:
Here you can set the configuration for each radio.
Mode:
For the radio 1, you can select it to run the
802.11a
protocol.
For the radio 2, you can select it to run the
802.11g only
protocol or the
802.11b/g
(mix mode)
– allowing both 802.11b and 802.11g to co-exist.
Channel:
Select the channel from the available list to match your network settings. All devices in the
wireless network must use the same channel and share the total bandwidth available.
Note:
The available channels are different from country to country and for different WLAN mode.
Security Policy:
You can select different security policy to provide association authentication and/or
data encryption.
AirLive WLA-5000AP WISP+Client Router Mode
20
Summary of Contents for WLA-500AP
