You can select one of the following two ways to assign IP addresses:
Assigns IP addresses to wired or wireless clients from the following range
:
When IP addresses are assigned to a requesting DHCP client, after the “
lease time
”, the cli-
ent is expected to renew the lease. Its default value is 10080 minutes.
The
from
and
to
range of IP addresses to be assigned to requesting DHCP clients can be
configured manually, with the default being 2 to 254.
After you enter the information, you should press
APPLY
.
Assigns the following IP address to the client with the following MAC address
:
You can also specify the
IP address
to be assigned to a device with a pre-configured
MAC ad-
dress
.
You can add such a mapping by entering a MAC address, and the IP address to be assigned, fol-
lowed by pressing the
ADD
button. Up to 20 mappings can be added.
You can delete a mapping by
select
ing the corresponding entry and press the
DELETE SE-
LECTED
button.
DHCP Table
: Press this button will cause the screen to jump to DHCP client table page.
AirLive WLA-5000AP WISP+Client Router Mode
32
Summary of Contents for WLA-500AP
