manualshive.com logo in svg

Air Live FE-501OD, User Manual

Share
Download
Air Live FE-501OD User Manual Download Page 54

5. Configuration 

 
 
 
 

 

AirLive FE-501OD User’s Manual

 50

 

 

•

 User 

Name: Enter the new user name to be added into the list (see Note 4 of 

dialog for proper entry). 

•

 Password: Enter the new password (see Note 4 of dialog for proper entry). 

•

 Confirm 

password: Enter the password again for authentication (encoded 

display). 

•

 Show 

Password: Displays the decoded password when check box is enabled. 

•

 User 

Group: Three

 

group options are available, namely:   

Administrator: 

User is allowed to change Camera settings and perform all 

Camera functions. 

Operator: 

User is allowed to login “Live View” Webpage and perform all 

functions within this page. Except changing Video and Audio settings of 
Camera live stream, other adjustments of Camera parameter are prohibited. 

Viewer: 

User is only allowed to login “Live View” Webpage and perform all 

functions within this page. Changing Camera settings is prohibited. 
 

: 

After setups are completed, click “Save” button to apply the settings.

 

 
 

Summary of Contents for FE-501OD





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands