manualshive.com logo in svg

Air Live FE-501OD, User Manual

Share
Download
Air Live FE-501OD User Manual Download Page 5

1. Overview 

AirLive FE-501OD User’s Manual

 

1 

1 

1. 

Overview 

 

       

 

This user’s manual explains how to operate this camera. Users should read this manual 
completely and carefully in advance. 
 
 

1.1 Introduction 

 
AirLive FE-501OD is a Fish-Eye Panorama Network Dome Camera featured with 5Mega 
Pixel resolution respectively and superior H.264-AVC performance and rich functions. 
FE-501OD includes a fish-eye lens for 360° panoramic wide angle view without blind spot. 
It is very suitable to view a wide area with single camera such as hallway, store, and office 
without the need to install multiple cameras. 
The hardware base panorama video processing ability provides user flexible video layout 
including Panorama, Original View, Double Broad View, Triple View and Quad View. The 
e-PTZ function, including preset point without moving parts, can replace part of traditional 
PTZ camera and thus save lost of traditional mechanical Pan/Tilt maintain cost.   
Further functions include two-way audio, DI/DO alarm application and micro SD card 
support for local storage application. 

Summary of Contents for FE-501OD





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands