Air Liquide M 132, User Manual

Page: 11 / 52

3.7 INSTALLING SG 185 SPOOL GUN
1. Lift and position the side panel into an upright position.
2 . Remove gun inlet cover located on the front panel of the welding machine.
3 . Insert the SG 185 Spool Gun through the gun inlet.
4 . Remove the gas hose from the gas inlet on the wire feeder unit (See reference 1 in figure 1).
5. Connect the male gas connection (See reference 2 in figure 2) of the spool gun to the gas hose.
6 . Remove the male trigger connector (See reference 2 in figure 1).
7 . Connect the male spool gun trigger connector (See reference 1 in figure 2) to the female trigger receptacle.
8 . Connect the power cable lug (See reference 3 in figure 2) to the positive receptacle inside the unit
(See reference 3 in figure 1).
11
Fig. 1
1
2
Fig. 2
1
3
2
3