22
Installation
For questions or help regarding installation, call customer service at 1-315-452-7400 or
email
a sketch of the proposed area where the unit is to be
installed.
Pre-Installation
Test the system before installing it to check for non-visible shipping damage.
✓
Set the system on the floor or on a sturdy, level surface.
✓
Ensure the control cable and remote interface controller are plugged into one of
the com ports.
✓
Plug in the system.
✓
Press the on/off switch to see if the control illuminates. This indicates the system
has power.
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
SHARP EDGES ARE PRESENT INSIDE THE WINE GUARDIAN SYSTEM
Pre-Installation Planning
Prior to installation, determine how best to mount the system.
Install
ing The
Fan-Coil
Floor Mounting - Mount the Wine Guardian fan coil on the floor but elevate it
4” (10cm)
as a minimum on a frame with a plywood surface to keep it away from water. Allow
adequate space for the external drain.
IMPORTANT
Installation of residential and commercial split systems must be performed by qualified service
technicians with proper training in the installation, start up, service, and repair of these systems.
Certification to handle refrigerants is also required.
Summary of Contents for WINE GUARDIAN DS025
